Self Contained 1/4 Ton 1800XTSx Outdoor #1652

CellarPro 1800XTSx-EC Cooling Unit (P/N 1652). NOW WITH COATED ALUMINUM EVAPORATOR COILS FOR LONGER LIFE! CellarPro's 1800XTSx-EC cooling unit is the most powerful in its class, with maximum BTUH and cooling capacity for wine cellars up to 400 cubic feet*, and can be used in outdoor installations. 1800XTSx-EC units are 30% more powerful than CellarPro 1800XT units, and also louder.

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar. Designed for outdoor installations, 1800XTSx-EC units can operate in environments ranging from 20F to 95F out of the box. To operate the unit in colder temperatures, please see modifications listed on the Options & Upgrades tab.

- Spec Sheet
- Sizing Table
- Owner's Manual [Learn More]
- CellarPro Product Brochure [Learn More]

*Assuming R19 insulation throughout the cellar, 55F inside the cellar and 85F outside the cellar.

1886 SENSIBLE BTUH @ 55F.
CellarPro's 1800XTSx-EC wine cooling units (1/4 Ton Nominal) were designed for outdoor installations and engineered to provide maximum cooling performance for small wine cellars up to 400 cubic feet.* Now with an energy-efficient EC fan on the cold side.

Starting with CellarPro's 1800XTS, we've added the following options and upgrades:

• Dual hot-side fans for maximum air output
• An outdoor hood to protect the rear of the cooling unit from rain.
• Rear condensate drain line to channel excess condensate away from the cooling unit.
• Compressor heater to protect internal components from damage in cold temperatures.
• Power cord modification to allow the unit to be powered from inside the wine cellar.
• Coated condenser coils to protect against outdoor pollutants and extend the unit's longevity.

Please note:

1. The exterior hood must have at least five (5) inches of clearance on the rear side, and 18 inches of clearance below the cooling unit outside the cellar. In addition, the cooling unit requires at least eight (8) inches of clearance inside the cellar in front of the cooling unit (same as other 1800 cooling units.)
2. This unit can be used in North America as well as in overseas markets
3. Please note: Our units were not designed for, and our warranty does not cover damage from, marine exposure (within 5 miles of the ocean). In these environments, you will need an applied coating, such as Insitu , to protect outdoor components against corrosion that is common in coastal regions.

Our cooling units are designed to be used in properly-constructed wine cellars that are adequately insulated, airtight and sealed with a vapor barrier. In improperly-constructed cellars, the cooling unit will create excess condensation, leading to damage and premature failure of your cooling unit (not covered by warranty).